UNIVERSITI TEKNIKAL MALAYSIA MELAKA
STAFF PROFILE
NAME PROFESOR MADYA DR RAJA IZAMSHAH BIN RAJA ABDULLAH
   
FACULTY / CENTRE FAKULTI KEJURUTERAAN PEMBUATAN
   
DESIGNATION PENSYARAH UNIVERSITI
   
CURRENT POSITION KETUA, KLUSTER BAHAN TERMAJU DAN KEJURUTERAAN JITU - PUSAT PEMBUATAN TERMAJU
   
EMAIL izamshah@utem.edu.my
 
 
 
ACADEMIC QUALIFICATION
 
YEAR QUALIFICATION INSTITUTION
2012  KEDOKTORAN FALSAFAH (PH.D)  RMIT UNIVERSITY
2005  SARJANA (MASTERS)  UNIVERSITY OF BIRMINGHAM
2004  SARJANA MUDA (BACHELOR)  UNIVERSITI TEKNOLOGI MARA, SHAH ALAM
TEACHING EXPERIENCE  (last 5 years)
 
  UNDERGRADUATES
SESSION COURSE
2020/2021  BMFS4523 - ADVANCED CNC MACHINING
2020/2021  BMFS4613 - CNC MACHINING
2020/2021  BMMI1083 - ASSESMENT OF MACHINABILITY
2019/2020  BMFS4523 - ADVANCED CNC MACHINING
2019/2020  BMFS4613 - CNC MACHINING
2019/2020  BMMI1083 - ASSESMENT OF MACHINABILITY
2018/2019  BMFS2623 - ADVANCE MANUFACTURING PROCESS
2018/2019  BMFS4523 - ADVANCED CNC MACHINING
2018/2019  BMFS4613 - CNC MACHINING
2018/2019  DMFD3333 - CNC TECHNOLOGY
2017/2018  BMFS4523 - ADVANCED CNC MACHINING
2017/2018  BMFS4613 - CNC MACHINING
2017/2018  DMFD3333 - CNC TECHNOLOGY
2016/2017  BMFS4433 - VIBRATION
 
 POSTGRADUATES
SESSION COURSE
2018/2019  MMFQ5043 - STATISTICAL QUALITY CONTROL AND 6 SIGMA
LIST OF GRANTS (last 5 years)
 
YEAR AWARDED TITLE OF PROJECT TYPE OF GRANT AMOUNT (RM) ROLE
2020  DESIGN AND DEVELOPMENT OF LOW COST SOLUTION AND TELEMETRY IOT FOR DOCKING SYSTEM GERAN INDUSTRI (INDUSTRY) 300802.15 CO-RESEARCHER
2020  DEVELOPMENT OF 3D PRINTED PROSTHETIC SOCKET FOR LOWER LIMB AMPUTEE AT PERKESO REHABILITATION CENTER GERAN INDUSTRI (INDUSTRY) 200000 CO-RESEARCHER
2020  RIGOROUS VALIDATION AND RELIABILITY TESTING OF THE OPTIMIZED TOOL FOR COMPOSITE (CFRP) MATERIAL FOR AEROSPACE INDUSTRIES GERAN PJP PROTOTAIP (PEMBANGUNAN PRODUK) (COMMERCIALIZATION) 20000 CO-RESEARCHER
2020  GREEN RECYCLING ROUTE FOR PLASTIC MANUFACTURER THROUGH WATER-ASSISTED MELT COMPOUNDING FOR LIGHTWEIGHT PLASTIC WASTE CONCRETE AGGREGATES SHORT TERM (UTEM) 20000 CO-RESEARCHER
2019  DEVELOPMENT OF PORTABLE VACUUM CLAMPING SYSTEM (INTELLIGENT CLAMP, ICLAM) MTUN PENGKOMERSILAN (COMMERCIALIZATION) 20000 CO-RESEARCHER
2019  HOLE MAKING, SLOTTING, AND PARTING OF ALUMINA USING LASER MACHINING CAPABILITY DEVELOPMENT GERAN INDUSTRI (INDUSTRY) 30000 CO-RESEARCHER
2019  EXPERIMENTAL STUDY ON THE EFFECTS OF MALAYSIAN QUARRY DUST NANOFLUID AS COOLANT IN DRILLING OF TITANIUM ALLOY GERAN FRGS (NATIONAL) 75234 CO-RESEARCHER
2019  MODULAR AIRLESS TYRE - FULL SCALE PERFORMANCE VALIDATION TOWARDS REPLACING AUTOMOBILE PNEUMATIC TYRES GERAN PRGS (NATIONAL) 117000 CO-RESEARCHER
2019  UP SCALING AC-GRAPHENE SUPERCAPACITOR AND ITS INTEGRATION WITH LI IRON PHOSPHATE BATTERY FOR HIGH PERFORMANCE HYBRID ENERGY STORAGE SYSTEM GERAN PRGS (NATIONAL) 145000 CO-RESEARCHER
2019  INFLUENCE OF TOOL GEOMETRICAL DESIGN AND MACHINING PARAMETERS IN REDUCING DAMAGES OF CFRP DURING TRIMMING PROCESS GERAN FRGS (NATIONAL) 80300 CO-RESEARCHER
2019  THE STUDY OF FUNDAMENTALS PECK DRILLING PROCEDURE ON THE MATERIALS CHARACTERISTICS OF FRP COMPOSITE GERAN FRGS (NATIONAL) 94700 CO-RESEARCHER
2019  PROTOTYPE DEVELOPMENT OF ROTARY-ULTRAFINE WIRE ELECTRO DISCHARGE MACHINING (WEDM) DEVICE FOR PRECISION MICRO-PART FABRICATION GERAN PRGS (NATIONAL) 132000 MAIN RESEARCHER
2018  DEVELOPMENT OF HIGH PERFORMANCE PORTABLE POWER PACK GENERATOR FROM ACTIVATED CARBON- GRAPHENE SUPERCAPACITOR AND MYLIPOS BATTERY GERAN INDUSTRI (INDUSTRY) 60000 CO-RESEARCHER
2018  MODIFICATION AND INVESTIGATION OF JOHNSON-COOK FLOW STRESS MODEL BY DEVELOPED SHEAR SLITTING MACHINE SHORT TERM (UTEM) 20000 CO-RESEARCHER
2018  MODIFICATION AND INVESTIGATION OF JOHNSON-COOK FLOW STRESS MODEL BY DEVELOPED SHEAR SLITTING MACHINE SHORT TERM (UTEM) 20000 CO-RESEARCHER
2018  MODIFICATION AND INVESTIGATION OF JOHNSON-COOK FLOW STRESS MODEL BY DEVELOPED SHEAR SLITTING MACHINE SHORT TERM (UTEM) 20000 CO-RESEARCHER
2017  THE EFFECT OF COPPER (CU) ADDITION ON THE MECHANICAL PROPERTIES, THERMAL CONDUCTIVITY AND MACHINABILITY OF AISI D2 TOOL STEEL GERAN FRGS (NATIONAL) 80772 CO-RESEARCHER
2017  MULTI OBJECTIVE OPTIMIZATION OF HYBRID ROTARY ULTRASONIC ASSISTED MICRO DRILLING ON CHEMICALLY STRENGTHENED GLASS SHORT TERM (UTEM) 10000 MAIN RESEARCHER

PUBLICATIONS (last 5 years)
 
JOURNAL
YEAR TITLE NAME OF JOURNAL AUTHORS
2020  EFFECT OF MACHINING PARAMETERS ON SURFACE ROUGHNESS IN EDGE TRIMMING OF CARBON FIBER REINFORCED PLASTICS (CFRP)  TRIBOLOGY ONLINE  SUNDI, S.A., IZAMSHAH, R., KASIM, M.S.
2020  ELECTROCHEMICAL PERFORMANCE OF MOLYBDENUM DISULFIDE SUPERCAPACITOR ELECTRODE IN POTASSIUM HYDROXIDE AND SODIUM SULFATE ELECTROLYTES  INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY AND ENGINEERING  RNAR SEMAN, MA AZAM, MFA AZIZ, R IZAMSHAH, MS KASIM
2020  STATISTICAL ANALYSIS ON THE EFFECT OF MACHINING CONDITIONS TOWARDS SURFACE FINISH DURING EDGE TRIMMING OF CARBON FIBER REINFORCED PLASTICS (CFRP)  INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS  SUNDI, S.A., IZAMSHAH, R., KASIM, M.S., DING, S., JAAFAR, M.F.
2019  AN ASSESSMENT FOR A NEW APPROACH TO PULSATING LUBRICATION STRATEGY (PLS) IN END MILLING  INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  M.S.A HAFIZ, M.S KASIM, R IZAMSHAH, W.N.F MOHAMAD, A ABDULLAH, M.F JAAFAR
2019  AN ASSESSMENT FOR A NEW APPROACH TO PULSATING LUBRICATION STRATEGY (PLS) IN END MILLING  INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Hafiz M.S.A., Kasim M.S., Izamshah R., Mohamad W.N.F., Abdullah A., Jaafar M.F.
2019  ANALYSIS ON EFFECT OF BALL BLADDER SIZE DURING WATER HAMMER IN DOMESTIC WATER SYSTEM  JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES  Nasir F.F.M., Kasim M.S., Izamshah R., Hafiz M.S.A., Ghani J.A., Yusof A.A., Wong P.K., Mohamad W.N.F.
2019  ANALYSIS ON EFFECT OF BALL BLADDER SIZE DURING WATER HAMMER IN DOMESTIC WATER SYSTEM  JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES  FAARIH FARHAN MOHD NASIR, MOHD SHAHIR KASIM, RAJA IZAMSHAH, MOHAMMAD SHAH ALL HAFIZ, JAHARAH A GHANI, AHMAD ANAS YUSOF, PUI KEI WONG, W NOOR FATIHAH MOHAMAD
2019  CHIP MORPHOLOGY IN BALL NOSE END MILLING PROCESS OF NICKEL BASED ALLOY MATERIAL UNDER MQL CONDITION  INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  KASIM M.S., HAFIZ M.S.A., GHANI J.A., HARON C.H.C., IZAMSHAH R., AZIZ M.S.A., MOHAMAD W.N.F., WONG P.K., SAEDON J.
2019  CHIP MORPHOLOGY IN BALL NOSE END MILLING PROCESS OF NICKEL-BASED ALLOY MATERIAL UNDER MQL CONDITION  INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Kasim M.S., Hafiz M.S.A., Ghani J.A., Haron C.H.C., Izamshah R., Aziz M.S.A., Mohamad W.N.F., Wong P.K., Saedon J.
2019  ENHANCING THE PRODUCTIVITY OF WIRE ELECTRICAL DISCHARGE MACHINING TOWARD SUSTAINABLE PRODUCTION BY USING ARTIFICIAL NEURAL NETWORK MODELLING  EMITTER-INTERNATIONAL JOURNAL OF ENGINEERING TECHNOLOGY  M.A.M. ZAKARIA R. IZAMSHAH M.S. KASIM M.H. IBRAHIM
2019  HELICAL MICRO-HOLE DRILLING OF CHEMICALLY STRENGTHENED GLASS USING CAPSULE-SHAPED ELECTROPLATED DIAMOND TOOL  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  AZIZ M.S.A., MIZOBUCHI A., IZAMSHAH R., KASIM M.S., MOHAMAD E., SALLEH M.R., ISHIDA T.
2019  INFLUENCE ON THRUST FORCE AND DELAMINATION FOR ONE SHOT DRILLING OF CARBON FIBRE REINFORCED PLASTIC (CFRP)  INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING  Jaafar M.F., Salleh M.S., Izamshah R., Hassan M.H., Sundi S.A., Hafiz M.S.A., Kasim M.S.
2019  INFLUENCE ON THRUST FORCE AND DELAMINATION FOR ONE SHOT DRILLING OF CARBON FIBRE REINFORCED PLASTIC (CFRP)  INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING  M.F. JAAFAR, M.S. SALLEH, R. IZAMSHAH, M. H. HASSAN, S.A. SUNDI, M.S.A. HAFIZ AND M.S KASIM
2019  INVESTIGATION OF SURFACE TOPOLOGY IN BALL NOSE END MILLING PROCESS OF INCONEL 718  WEAR  M.S. KASIM, M.S.A. HAFIZ, J.A. GHANI, C.H.C. HARON, R. IZAMSHAH, S.A. SUNDI, S.B. MOHAMED, I.S. OTHMAN
2019  INVESTIGATION OF SURFACE TOPOLOGY IN BALL NOSE END MILLING PROCESS OF INCONEL 718  WEAR  Kasim M.S., Hafiz M.S.A., Ghani J.A., Haron C.H.C., Izamshah R., Sundi S.A., Mohamed S.B., Othman I.S.
2019  OPTIMIZATION OF CFRP MICRO DRILLING PARAMETER USING 2-LEVEL FACTORIAL METHOD TOWARDS THRUST FORCE  INTERNATIONAL JOURNAL OF ENGINEERING AND ADVANCED TECHNOLOGY  N. SYUHADA NASIR, N. AB WAHAB, R. IZAMSHAH, H. SASAHARA, S.A. SUNDI
2019  ROTARY ULTRASONIC ASSISTED MACHINING OF MOULD AND DIE MATERIAL  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  AZLAN R., IZAMSHAH R., KASIM M.S., DING S., AKMAL M.
2019  SURFACE INTEGRITY STUDY FOR FC300 CAST IRON USING TIAIN BALL END MILL  JURNAL TRIBOLOGI  MOHD HADZLEY ABU BAKAR, NAIM FAHMI, NORFAUZI TAMIN, ANIS AFUZA, RAJA IZAMSHAH, SHAHIR KASIM, MOHD AMRAN, NOORAZIZI SHAMSUDIN, NURUL FATIN RAFFI
2019  THE EFFECTS OF DRY AND CHILLED AIR ON TOOL WEAR BEHAVIOR DURING FACE MILLING OF INCONEL 718  JURNAL TRIBOLOGI  M.S.A. HAFIZ M.S. KASIM W.N.F. MOHAMAD N.S.M. ZAINURIN I.S. OTHMAN R. IZAMSHAH M. AKMAL S.B. MOHAMED M.A.M. NAWI
2018  A STUDY ON SURFACE ROUGHNESS DURING FUSED DEPOSITION MODELLING: A REVIEW  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  HARUN N.H., KASIM M.S., ABIDIN M.Z.Z., IZAMSHAH R., ATTAN H., GANESAN H.N.
2018  A STUDY ON SURFACE ROUGHNESS DURING FUSED DEPOSITION MODELLING: A REVIEW  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Harun N.H., Kasim M.S., Abidin M.Z.Z., Izamshah R., Attan H., Ganesan H.N.
2018  CHIP DISCHARGE PERFORMANCE OF MICRO-HOLE DRILLING THROUGH A GLASS PLATE USING AN ELECTROPLATED DIAMOND TOOL WITH DIFFERENT DRILL BITS  INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING  Mizobuchi A., Aziz M.S.A., Izamshah R., Ishida T.
2018  CLEANER PRODUCTION IMPLEMENTATION IN AN E-WASTE RECOVERY PLANT BY USING THE VALUE STREAM MAPPING  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Ishak A., Mohamad E., Sukarma L., Salleh M.S., Salleh M.R., Mohamad N.A., Abdullah R.I.R., Ali M.A.M.
2018  COOLING EFFECT EFFICIENCY PREDICTION OF ALUMINUM DIMPLES BLOCK USING DOE TECHNIQUE  INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY(UAE)  GANESAN H.N., KASIM M.S., IZAMSHAH R., ANAND T.J.S., HAFIZ M. S.A. , NAWI M.A.M., MOHAMED S.B.
2018  DEVELOPMENT OF SURFACE ROUGHNESS PREDICTION MODEL USING RESPONSE SURFACE METHODOLOGY FOR END MILLING OF HTCS-150  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  A.B. HADZLEY, W.M. AZAHAR, A.A. ANIS, R. IZAMSHAH, M. AMRAN, S. KASIM AND S. NOORAZIZI
2018  DEVELOPMENT OF SURFACE ROUGHNESS PREDICTION MODEL USING RESPONSE SURFACE METHODOLOGY FOR END MILLING OF HTCS-150  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Hadzley A.B., Azahar W.M., Anis A.A., Izamshah R., Amran M., Kasim S., Noorazizi S.
2018  EFFECT OF THERMAL CYCLES ON PHYSICAL AND TENSILE PROPERTIES OF NEWLY MODIFIED NR/EPDM BLEND  JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES  Mohamad N., Karim K., Lim R.L., Maulod H.E.A., Razak J.A., Azam M.A., Kasim M.S., Izamshah R.
2018  EFFECT OF THERMAL CYCLES ON PHYSICAL AND TENSILE PROPERTIES OF NEWLY MODIFIED NR/EPDM BLEND  JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES  NORAIHAM MOHAMAD K. KARIM, R. L LIM, HAIRUL EFFENDY AB MAULOD, JEEFFERIE ABD RAZAK, MOHD ASYADI AZAM, MOHD SHAHIR KASIM, RAJA IZAMSHAH
2018  EXPERIMENTAL ANALYSIS ON PARAMETERS AFFECTING THE MATERIAL REMOVAL RATE IN WIRE ELECTRICAL DISCHARGE TURNING USING THE TAGUCHI METHOD  INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING IJMME-IJENS VOL:18 NO:05  R. IZAMSHAH1,2, M. AKMAL2*, M.S. KASIM1,2, S.B. MOHAMED3
2018  EXPERIMENTAL INVESTIGATION OF DRILLING PROCESS USING NANOFLUID AS COOLANT  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Liew P.J., Yahaya M.R., Salleh M.S., Izamshah R., Wang J.
2018  FABRICATION AND MACHINING PERFORMANCE OF POWDER COMPACTED ALUMINA BASED CUTTING TOOL  MATEC WEB OF CONFERENCES  MOHD HADZLEY ABU BAKAR, MUHAMAD NAIM FAHMI, MUHAMMAD FAIZ MOKHTAR, NORFAUZI TAMIN, UMAR AZLAN AL AMANI,, ABDUL AZIZ ADAM, RAJA IZAMSHAH RAJA ABDULLAH AND MOHD SHAHIR KASIM
2018  INVESTIGATION OF EFFECTS OF CARBON NANOFIBER NANOFLUID IN DRILLING OF AISI 304 STAINLESS STEEL  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  PJ LIEW, MH AINI SYAHIDA, S AINUSYAFIQAH, S MOHD AMRI, RA RAJA IZAMSHAH
2018  INVESTIGATION OF EFFECTS OF CARBON NANOFIBER NANOFLUID IN DRILLING OF AISI 304 STAINLESS STEEL  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Liew P.J., Aini Syahida M.H., Ainusyafiqah S., Sulaiman M.A., Izamshah R.
2018  INVESTIGATION OF TANGENTIAL FORCE ON BALL NOSE RAKE FACE DURING HIGH-SPEED MILLING OF INCONEL 718  ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES  Kasim M.S., Che Haron C.H., Ghani J.A., Izamshah R., Akmal M., Ali M.A., Hadzley M., Salleh M.S.
2018  INVESTIGATION OF TANGENTIAL FORCE ON BALL NOSE RAKE FACE DURING HIGH-SPEED MILLING OF INCONEL 718  ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES  M. S. KASIM, C. H. CHE HARON, J. A. GHANI, R. IZAMSHAH, M. AKMAL, M. A. ALI, M. HADZLEY & M. S. SALLEH
2018  MACHINABILITY ULTRASONIC ASSISTED MILLING OF INCONEL 718 BY USING TAGUCHI METHOD  ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES  MSA HAFIZ, MS KASIM, WNF MOHAMAD, R IZAMSHAH, MSA AZIZ, M AKMAL, IS OTHMAN AND SA SUNDI
2018  MACHINABILITY ULTRASONIC ASSISTED MILLING OF INCONEL 718 BY USING TAGUCHI METHOD  ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES  Hafiz M.S.A., Kasim M.S., Mohamad W.N.F., Izamshah R., Aziz M.S.A., Akmal M., Othman I.S., Sundi S.A.
2018  MATHEMATICAL MODELLING AND CONCEPTUAL DESIGN OF NOVEL AUTOMATIC TYRE INFLATING SYSTEM  JURNAL TEKNOLOGI  Sivaraos, Umesh K., Salleh M.S., Sivakumar D., Izamshah R., Ali M.A.M.
2018  MATHEMATICAL MODELLING AND CONCEPTUAL DESIGN OF NOVEL AUTOMATIC TYRE INFLATING SYSTEM  JURNAL TEKNOLOGI  SIVARAOS, K. UMESH, M. S. SALLEH, D. SIVAKUMAR, R. IZAMSHAH, M. A. M. ALI
2018  MULTI-RESPONSE OPTIMIZATION OF PLASTIC INJECTION MOULDING PROCESS USING GREY RELATIONAL ANALYSIS BASED IN TAGUCHI METHOD  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Md Ali M.A., Mohd Ali N.I., Kasim M.S., Izamshah R., Abdullah Z., Salleh M.S., Razak Z., Sharip R.M., Yamaguchi M.
2018  MULTIOBJECTIVE OPTIMIZATION OF INJECTION MOULDING PROCESS PARAMETERS ON MECHANICAL PROPERTIES USING TAGUCHI METHOD AND GREY RELATIONAL ANALYSIS  INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY  
2018  OPTIMIZATION OF DRILL GEOMETRY DESIGN TO MINIMIZE THERMAL NECROSIS IN SURGICAL BONE DRILLING  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Izamshah R., Noorazizi M.S., Kasim M.S., Hadzley M., Ali M.A., Sundi S.A.
2018  PARAMETRIC STUDY ON PARAMETER EFFECTS IN HYBRID MICRO WIRE ELECTRICAL DISCHARGE TURNING  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Izamshah R., Akmal M., Kasim M.S., Sued M.K., Sundi S.A., Amran M.
2018  PERFORMANCE EVALUATION OF ROTARY MECHANISM CHARACTERISTICS BY RESPONSE SURFACE METHODOLOGY IN CYLINDRICAL WIRE ELECTRICAL DISCHARGE TURNING  ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES  Izamshah R., Akmal M., Ali M.A., Kasim M.S.
2018  SIMULATION OF CUTTING FORCE DURING HIGH SPEED END MILLING OF INCONEL 718  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Ganesan H.N., Kasim M.S., Izamshah R., Anand T.J.S., Harun N.H., Sundi S.A.
2018  SIMULATION OF CUTTING FORCE DURING HIGH SPEED END MILLING OF INCONEL 718  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  H. N. GANESAN, M. S. KASIM, R. IZAMSHAH, T.J.S ANAND, N. H. HARUN1 S.A. SUNDI
2018  SIMULTANEOUS TWIN CUTTER TECHNIQUE FOR MACHINING THIN WALL LOW RIGIDITY PART  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Izamshah R., Affendi H., Mo J.P.T., Kasim M.S., Ding S., Mohamad N., Liew P.J., Ali M.A., Sundi S.A., Sued M.K.
2018  THE EFFECT OF SURFACE FINISH BY VARYING MACHINING STRATEGIES OF FIVE-AXIS FLANK MILLING FOR CURVY ANGLED CONVEX PROFILE  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  Sundi S.A., Izamshah R., Kasim M.S., Raffay M.R.
2018  WEAR CHARACTERISTICS OF RECYCLED CARBON FIBRE-FILLED POLYPROPYLENE COMPOSITES VIA ACIDIC SURFACE TREATMENT  WORLD REVIEW OF SCIENCE, TECHNOLOGY AND SUSTAINABLE DEVELOPMENT  MOHAMAD N., LATIFF A.A., MANAF M.E.A., AB MAULOD H.E., SHUEB M.I., MUNAWAR R.F., ABDULLAH R.I.R., KASIM M.S., MAZLAN M., RAZAK J.A., AZAM M.A.
2017  COMPARATIVE STUDY OF TOOL WEAR IN MILLING TITANIUM ALLOY (TI-6AL-4V) USING PVD AND CVD COATED CUTTING TOOL  INDUSTRIAL LUBRICATION AND TRIBOLOGY  Abdullah R.I.R., Redzuwan B.I., Abdul Aziz M.S., Kasim M.S.
2017  EFFECT OF DRILL GEOMETRY PARAMETER ON SURFACE ROUGHNESS AND HOLE MORPHOLOGY IN SURGICAL BONE DRILLING  INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH  Noorazizi M.S., Izamshah R., Kasim M.S., Hadzley M.
2017  EMERGING HYBRID WIRE ELECTRO DISCHARGE TURNING FOR MICRO PARTS FABRICATION IN THE DEFENCE TECHNOLOGICAL AREA: A FEASIBILITY STUDY  JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES  
2017  EVALUATION OF HOLE PERFORMANCE AND FORCE MAGNITUDE ON DRILLING PARAMETER FOR ORTHOPAEDIC SURGICAL BONE DRILLING  JOURNAL OF MECHANICAL ENGINEERING  Samsuddin N.M., Izamshah R., Kasim M.S., Haron C.H.C.
2017  FEASIBLE STUDY ON DENTAL RESTORATION USING TIME COMPRESSION TECHNOLOGIES  JOURNAL OF MECHANICAL ENGINEERING  Harun N.H., Kasim M.S., Abdullah R.I.R., Boejang H., Attan H.
2017  INFLUENCE OF GRINDING PARAMETERS ON SURFACE FINISH OF INCONEL 718  JOURNAL OF MECHANICAL ENGINEERING  Yaakob N.A., Ganesan H.N., Harun N.H., Abdullah R.I.R., Kasim M.S., Ghani J.A., Haron C.H.C.
2017  INVESTIGATION ON IMPROVEMENT OF SURFACE ROUGHNESS USING ROTARY ULTRASONIC ASSISTED MACHINING TECHNIQUE FOR HARDENED STEEL MATERIAL  JOURNAL OF MECHANICAL ENGINEERING  Ramli A., Abdullah R.I.R., Bakar M.H.A., Kasim M.S., Rahman M.A., Zakaria M.A.M.
2017  MECHANICAL PROPERTIES AND CUTTING PERFORMANCE OF ELECTROLESS TERNARY NI-W-P COATED CUTTING TOOLS  JURNAL TEKNOLOGI  Aziz M.S.A., Redzuwan B.I., Zaimi M., Izamshah R., Kasim M.S., Ali M.A.M., Mizobuchi A., Ishida T.
2017  PERFORMANCE EVALUATION OF ROTARY MECHANISM CHARACTERISTICS BY RESPONSE SURFACE METHODOLOGY IN CYLINDRICAL WIRE ELECTRICAL DISCHARGE TURNING.  ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES  
2017  SYNTHESIS OF GRAPHENE POWDERS FROM HYDROTHERMALLY PRODUCED NICKEL CATALYST BY USING ALCOHOL CATALYTIC CHEMICAL VAPOR DEPOSITION  PROCEEDINGS OF INNOVATIVE RESEARCH AND INDUSTRIAL DIALOGUE’16  
2017  THE EFFECT OF SURFACE FINISH BY VARYING MACHINING STRATEGIES OF FIVE-AXIS FLANK MILLING FOR CURVY ANGLED CONVEX PROFILE  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  SUNDI, S.A., IZAMSHAH, R., KASIM, M.S., RAFFAY, M.R.
 
CONFERENCE
 
YEAR TITLE NAME OF CONFERENCE AUTHORS
2019 SURFACE ROUGHNESS ANALYSIS OF ZIRCONIA DENTAL RESTORATION MANUFACTURED THROUGH CNC MILLING MACHINE SYMPOSIUM ON INTELLIGENT MANUFACTURING & MECHATRONICS 2019  
2018 SURFACE TEXTURE CHARACTERIZATION AND CHIP MORPHOLOGY IN BALL NOSE END MILLING PROCESS OF INCONEL 718 FOR TURBINE BLADES THE 6TH ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY  M.S. KASIM
2018 MACHINABILITY OF INCONEL 718 DURING FACE MILL 6TH ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY  M.S KASIM
2018 SWELLING EFFECTS OF NR/EPDM FILLED GRAPHENE NANOPLATELETS (GNPS) IN DIFFERENT TYPE OF SERVICE OILS FOR ENGINE MOUNTING 5TH MECHANICAL ENGINEERING RESEARCH DAY (MERD)  KHAIRU ILWANI KARIM, NORAIHAM MOHAMAD, JEEFFERIE ABD RAZAK, HAIRUL EFFENDY AB MAULOD, MAZLIAH MAZLAN, MOHD ASYADI AZAM MOHD ABID, MOHD SHAHIR KASIM, RAJA IZAMSHAH RAJA ABDULLAH
PROFESSIONAL MEMBERSHIPS / LEARNED SOCIETY
 
YEAR ROLE INSTITUTION LEVEL
 2017   AHLI : CHARTERED ENGINEER (ENGINEERING COUNCIL,UK(INSTITUTION OF MECHANICAL ENGINEERS-IMECHE))   LAIN-LAIN   ANTARABANGSA 
 
POSTGRADUATE SUPERVISION (last 5 years)
 
NO NAME LEVEL OF STUDY ROLE STATUS
1  AZLAN BIN RAMLI DOCTORATE MAIN SUPERVISOR GRADUATED   (2020)
2  NOORAZIZI BIN MOHD SAMSUDDIN DOCTORATE MAIN SUPERVISOR GRADUATED   (2017)
3  SADIQ AZIZ HUSSEIN DOCTORATE CO-SUPERVISOR GRADUATED   (2016)
4  W NOOR FATIHAH BINTI W. MOHAMAD DOCTORATE CO-SUPERVISOR ACTIVE  
5  MUHAMMAD AKMAL BIN MOHD ZAKARIA DOCTORATE MAIN SUPERVISOR ACTIVE  
6  MOHAMAD HALIM BIN IBRAHIM DOCTORATE MAIN SUPERVISOR ACTIVE  
7  SYAHRUL AZWAN BIN SUNDI DOCTORATE MAIN SUPERVISOR ACTIVE  
8  MOHANAD HAITHAM GHENI AL-KAWAZ DOCTORATE CO-SUPERVISOR ACTIVE  
9  MOHD FAIRUZ BIN JAAFAR DOCTORATE CO-SUPERVISOR ACTIVE  
10  HELMI AFFENDI BIN MOHAMAD AZMI MASTERS MAIN SUPERVISOR GRADUATED   (2019)
11  MUHAMMAD AKMAL BIN MOHD ZAKARIA MASTERS MAIN SUPERVISOR GRADUATED   (2017)
12  AARON YU LUNG MASTERS MAIN SUPERVISOR GRADUATED   (2017)
13  MOHD ZULHAIRI BIN TAJRY MASTERS MAIN SUPERVISOR GRADUATED   (2017)
14  BAHRIN IKRAM BIN REDZUWAN MASTERS MAIN SUPERVISOR GRADUATED   (2017)
15  NURUL HUSNA BINTI MOHD NAWAWI MASTERS MAIN SUPERVISOR GRADUATED   (2016)
16  NURUL FATIN BINTI MOHAMAD RAFFI MASTERS CO-SUPERVISOR GRADUATED   (2015)
17  ARSHAD BIN LAMAT MASTERS MAIN SUPERVISOR ACTIVE  
18  MUHAMMAD ZAKI BIN KASMAN MASTERS CO-SUPERVISOR ACTIVE  
19  MUHAMAD FIRDAUZ BIN ABD RASID MASTERS MAIN SUPERVISOR ACTIVE  
20  NUR FATIHATUR RAWDHAH BINTI MOHAMMAD ALI MASTERS CO-SUPERVISOR ACTIVE  
21  MOHAMMAD SHAH ALL HAFIZ BIN MOHD SHAHRIM MASTERS CO-SUPERVISOR ACTIVE  
22  NUR SYUHADA BINTI MD NASIR MASTERS CO-SUPERVISOR ACTIVE  
23  MUHAMMAD RAFIQ BIN ROSMAN MASTERS MAIN SUPERVISOR ACTIVE  
 
LIST OF RESEARCH AWARDS (last 5 years)
 
YEAR TITLE EXHIBITION LEVEL AWARD
2018   OPTIMAL DRILL DESIGN FOR SURGICAL APPLICATION     INTERNATIONAL  SILVER 
 
INTELLECTUAL PROPERTIES
 
YEAR INVENTION NAME
TYPE
2017  ORTHODRILL  COPYRIGHT
2014  A PLASTIC WALL TILE AND METHOD OF MANUFACTURING THEREOF   PATENT
 
     
  KATEGORI MAKLUMAT
PEJABAT DIRUJUK
 
  PERSONAL INFORMATION BAHAGIAN SUMBER MANUSIA, PEJABAT PENDAFTAR  
  ACADEMIC QUALIFICATON  
  PROFESSIONAL MEMBERSHIP / LEARNED SOCIETY  
  TEACHING EXPERIENCE

 

BAHAGIAN PENGURUSAN AKADEMIK, PEJABAT PENDAFTAR

 
 
  • UNDERGRADUATES
 
 
  • POSTGRADUATES

PUSAT PENGAJIAN SISWAZAH

(PPS)

 
  POSTGRADUATE SUPERVISION

PUSAT PENGAJIAN SISWAZAH

(PPS)

 
  FIELD OF INTEREST

PUSAT PENGURUSAN PENYELIDIKAN DAN INOVASI

(CRIM)

 
  LIST OF GRANTS  
  LIST OF RESEARCH AWARDS

PUSAT PENGKOMERSILAN

(UCC)

 
  INTELLECTUAL PROPERTIES  
  COMMERCIALIZATION  
  PUBLICATIONS PERPUSTAKAAN LAMAN HIKMAH  
  CONSULTANCY

PUSAT JARINGAN INDUSTRI DAN MASYARAKAT

(PJIM)