UNIVERSITI TEKNIKAL MALAYSIA MELAKA
STAFF PROFILE
 
   
   
NAME PROFESOR TS. DR. EFFENDI BIN MOHAMAD
FACULTY / CENTRE FAKULTI TEKNOLOGI DAN KEJURUTERAAN INDUSTRI DAN PEMBUATAN
DESIGNATION PENSYARAH UNIVERSITI
CURRENT POSITION PENGARAH - PUSAT PENGURUSAN KOLABORASI RICE UTEM-MELAKA
EMAIL effendi@utem.edu.my
 
 
ACADEMIC QUALIFICATION
YEAR QUALIFICATION INSTITUTION
2013  KEDOKTORAN FALSAFAH (PH.D)  TOKUSHIMA UNIVERSITY,JAPAN
2007  SARJANA (MASTERS)  COVENTRY UNIVERSITY, UNITED KINGDOM
2002  SARJANA MUDA KEPUJIAN(BACHELOR HONS)  UNIVERSITI MALAYA, MALAYSIA
 
TEACHING EXPERIENCE
UNDERGRADUATES
SESSION COURSE
1-2005/2006  BMFP3543 - ENGINEERING METROLOGY
1-2007/2008  DMFD2323 - MANUFACTURING PROCESS
2-2007/2008  BMFP4573 - INDUSTRIAL LAW & OSHA
1-2008/2009  BMFP3513 - INDUSTRIAL ENGINEERING
1-2008/2009  BMFP4553 - HUMAN RESOURCE MANAGEMENT
2-2008/2009  BMFP4573 - INDUSTRIAL LAW & OSHA
1-2009/2010  BMFP4523 - LEAN MANUFACTURING
1-2009/2010  BMFP4573 - INDUSTRIAL LAW & OSHA
2-2009/2010  BMFP4523 - LEAN MANUFACTURING
1-2013/2014  DMFD3582 - QUALITY CONTROL
2-2013/2014  BMFP3513 - INDUSTRIAL ENGINEERING
2-2013/2014  BMFS1312 - MANUFACTURING PRACTICE
3-2013/2014  BMFU3935 - INDUSTRIAL TRAINING
1-2014/2015  BMFG2113 - MANUFACTURING SYSTEM
1-2014/2015  BMFG4662 - OCCUPATIONAL SAFETY AND HEALTH MANAGEMENT
2-2014/2015  BMFP3513 - INDUSTRIAL ENGINEERING
2-2014/2015  BMFP4563 - MANUFACTURING STRATEGY
3-2014/2015  BMFU3935 - INDUSTRIAL TRAINING
1-2015/2016  BMFG2113 - MANUFACTURING SYSTEM
1-2015/2016  BMFG4662 - OCCUPATIONAL SAFETY AND HEALTH MANAGEMENT
2-2015/2016  BMFP3513 - INDUSTRIAL ENGINEERING
2-2015/2016  BMFP4563 - MANUFACTURING STRATEGY
3-2015/2016  BMFU3935 - INDUSTRIAL TRAINING
1-2016/2017  BMFG2113 - MANUFACTURING SYSTEM
1-2016/2017  BMFP3513 - INDUSTRIAL ENGINEERING
2-2016/2017  BMFP3423 - INDUSTRIAL ENGINEERING
2-2016/2017  BMFP4563 - MANUFACTURING STRATEGY
3-2016/2017  BMFG2113 - MANUFACTURING SYSTEM
1-2017/2018  BMFG2113 - MANUFACTURING SYSTEM
1-2017/2018  DMFD3382 - OCCUPATIONAL SAFETY AND HEALTH
2-2017/2018  BMFG4662 - OCCUPATIONAL SAFETY AND HEALTH MANAGEMENT
2-2017/2018  BMFP3423 - INDUSTRIAL ENGINEERING
2-2017/2018  DMFD2513 - MANUFACTURING MANAGEMENT
1-2018/2019  BMFG2113 - MANUFACTURING SYSTEM
1-2018/2019  BMFP4413 - MANUFACTURING MANAGEMENT
2-2018/2019  BMFP3423 - INDUSTRIAL ENGINEERING
2-2018/2019  BMFP4323 - LEAN SIX SIGMA
1-2019/2020  BMFG2113 - MANUFACTURING SYSTEM
1-2019/2020  BMFP4413 - MANUFACTURING MANAGEMENT
2-2019/2020  BMFP3423 - INDUSTRIAL ENGINEERING
2-2019/2020  BMFP4323 - LEAN SIX SIGMA
2-2019/2020  BMFP4413 - MANUFACTURING MANAGEMENT
1-2020/2021  BMFG2113 - MANUFACTURING SYSTEM
1-2020/2021  BMFP4413 - MANUFACTURING MANAGEMENT
2-2020/2021  BMFP4323 - LEAN SIX SIGMA
2-2020/2021  BMFP4413 - MANUFACTURING MANAGEMENT
1-2021/2022  BMFG2113 - MANUFACTURING SYSTEM
1-2021/2022  BMFP4413 - MANUFACTURING MANAGEMENT
2-2021/2022  BMFP3423 - INDUSTRIAL ENGINEERING
2-2022/2023  BMMP3804 - LEAN MANUFACTURING
1-2023/2024  BMIP3354 - INDUSTRIAL ENGINEERING
1-2023/2024  BMMP3354 - INDUSTRIAL ENGINEERING
1-2023/2024  BMMU4053 - ENGINEERING ETHICS & OSHE
 
POSTGRADUATES
SESSION COURSE
2023/2024  MMFS5033 - LEAN MANUFACTURING
2023/2024  MPSW5033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2023/2024  PPSW6033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2022/2023  MPSW5033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2022/2023  PPSW6033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2021/2022  MMFS5033 - LEAN MANUFACTURING
2021/2022  MPSW5033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2021/2022  PPSW6033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2020/2021  BMFP4413 - MANUFACTURING MANAGEMENT
2020/2021  MMFS5033 - LEAN MANUFACTURING
2020/2021  MPSW5033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2020/2021  PPSW6033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2019/2020  BMFP3423 - KEJURUTERAAN INDUSTRI
2019/2020  MPSW5033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2019/2020  PPSW6033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2018/2019  MPSW5033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2017/2018  MMFD5053 - FACILITIES PLANNING
2017/2018  MPSW5033 - ENGINEERING AND TECHNOLOGY MANAGEMENT
2016/2017  MMFD5053 - FACILITIES PLANNING
2016/2017  MMFU5033 - MANAGEMENT OF GLOBAL MANUFACTURING OPERATION
2015/2016  MMFD5053 - FACILITIES PLANNING
2014/2015  MMFD5053 - FACILITIES PLANNING
2014/2015  MTKA5213 - ADVANCED MANUFACTURING AND SERVICES MANAGEMENT
LIST OF GRANTS
YEAR AWARDED TITLE OF PROJECT TYPE OF GRANT AMOUNT (RM) ROLE
2023 A NEW APPROACH TO EVALUATE ENVIRONMENTAL SUSTAINABILITY ON INDUSTRY 4.0 READINESS BY CONSIDERING MALAYSIA CULTURAL VALUE PREFERENCES GERAN FRGS (NATIONAL) 77750 CO-RESEARCHER
2023 CHARACTERISATION AND APPLICATION OF BIO-BASED NANOLUBRICANT WITH THE ADDITION PF SCALLOP SHELL NANO-SIZE POWDER AS A FRICTION REDUCTION ADDICTIVE IN LUBRICANT GERAN ANTARABANGSA (INTERNATIONAL) 60000 CO-RESEARCHER
2023 A BENCHMARKING STUDY FOR UTEM SATELLITE UNIVERSITY CAMPUS ESTABLISHMENT AT KOTA TINGGI, JOHORE TOPDOWN (UTEM) 10000 CO-RESEARCHER
2023 RAPID ADVANCE FUTURE (RAF) LIGHTWEIGHT PROSTHETIC LEGS GERAN PJP PROTOTAIP (PEMBANGUNAN PRODUK) (COMMERCIALIZATION) 20000 CO-RESEARCHER
2023 CORRUPTION RISKS IN MANUFACTURING INDUSTRY SECTOR GERAN KHAS (NATIONAL) 48000 CO-RESEARCHER
2022 PEMBANGUNAN KAKI PROSTETIK RINGAN UNTUK ORANG KURANG UPAYA - PROGRAM PENYELIDIKAN BERSAMA KOMUNITI PELAJAR TVET TOPDOWN (UTEM) 25000 CO-RESEARCHER
2022 DEVELOPMENT AND PERFORMANCE TESTING OF THE E-BUGGY POWER GENERATOR SYSTEM, A JOINT RESEARCH PROGRAM WITH THE TVET STUDENT COMMUNITY TOPDOWN (UTEM) 20000 CO-RESEARCHER
2022 THE DEVELOPMENT OF WATER TAP ABLUTION TO REDUCE WATER CONSUMPTION CONSIDERING CULTURAL INFLUENCES AND IOT MONITORING SYSTEM SHORT TERM (UTEM) 20000 CO-RESEARCHER
2020 A THEORETICAL FORMULATION OF NEAR-NET-SHAPE DATA ANALYTICS MODEL IN LEAN MANUFACTURING DECISION SUPPORT SYSTEM. GERAN FRGS (NATIONAL) 99000 MAIN RESEARCHER
2020 EXPERIMENTAL AND SIMULATION STUDY ON THE HEAT GENERATION IN THE HIGH-SPEED TURNING OF NIMONIC C-263 ALLOY USING CRYOGENIC COOLANT. GERAN FRGS (NATIONAL) 88264 CO-RESEARCHER
2019 HYGIENIC PORTABLE FEMALE URINAL DEVICE (HPFUD) FOR ELDERLY APPLICATION MTUN PENGKOMERSILAN (COMMERCIALIZATION) 30000 CO-RESEARCHER
2017 FORMULATING A NEW FLEXIBLE MODEL-BASED CONCEPT IN CONFIGURING AUTOMATION SYSTEM TOWARDS MANUFACTURING SUSTAINABILITY GERAN FRGS (NATIONAL) 95400 CO-RESEARCHER
2016 DEVELOPMENT OF MANUFACTURING LAYOUT DESIGN EVALUATION TECHNIQUE USING SIMULATION MODELING WITH ERGONOMICS INTEGRATION SHORT TERM (UTEM) 7000 CO-RESEARCHER
2016 A CONCEPT OF CYBER PHYSICAL PROGRAMMABLE CONTROLLED MATERIAL HANDLING SYSTEM SHORT TERM (UTEM) 20000 CO-RESEARCHER
2015 A NEW APPROACH OF CRYOGENIC (CO2) COOLING IN HIGH SPEED TURNING OF TITANIUM ALLOY GERAN FRGS (NATIONAL) 120420 CO-RESEARCHER
2015 MANUFACTURING EXCELLENCE FOR MALAYSIAN SMES THROUGH HYBRID QUICK RESPONSE MANUFACTURING FRAMEWORK GERAN FRGS (NATIONAL) 124000 CO-RESEARCHER
2014 A NEW APPROACH OF FLOW VISUALIZATION TECHNIQUE USING SLANTED GLASS TO ENHANCEMENT PLASTIC PART QUALITY GERAN FRGS (NATIONAL) 101000 CO-RESEARCHER
2014 A PROTOTYPE DEVELOPMENT FOR IRIS IDENTIFICATION SYSTEM (IIS) UTEM COE (UTEM) 19392 CO-RESEARCHER
2014 MODELLING ROBOTIC TEACHING FOR TECHNICAL EDUCATION COMPETENCY BASED ON KANSEI ENGINEERING ANALYSIS SHORT TERM (UTEM) 22000 CO-RESEARCHER
2014 DEVELOPMENT ON NEW FRAMEWORK OF WASTE QUANTIFICATION USING INTELLIGENT AGENT-BASED APPROACH SHORT TERM (UTEM) 14800 MAIN RESEARCHER
2013 PORTABLE ACCUMULATOR FOR DOMESTIC WATER SYSTEM SHORT TERM (UTEM) 20200 CO-RESEARCHER
2009 THE IMPLEMENTATION OF RISK MANAGEMENT IN AN AEROSPACE MANUFACTURING COMPANY SHORT TERM (UTEM) 10500 MAIN RESEARCHER
2008 PRODUCTIVITY IMPROVEMENT : A CASE STUDY AT A COMMUNICATION MANUFACTURING COMPANY SHORT TERM (UTEM) 10000 MAIN RESEARCHER
2008 THE EFFECT ON JIG DESIGN ON HAND MUSCLES ACTIVITIES FRGS (NATIONAL) 70000 CO-RESEARCHER
2007 PRODUCTIVITY ANALYSIS AT A TEXTILE MANUFACTURING COMPANY SHORT TERM (UTEM) 0 CO-RESEARCHER
 
PUBLICATIONS
JOURNAL
YEAR TITLE NAME OF JOURNAL AUTHORS
2023  DESIGN OF BIOMASS FIRED DRYER USING INTEGRATING DESIGN THINKING AND TRIZ METHOD  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  ADIYANTO, O., MOHAMAD, E., JAAFAR, R., FAISHAL, M. AND SUPRIYANTO, S.,
2023  LIFE CYCLE ASSESSMENT OF ECO-BRICK PRODUCTION USING PET PARTICLE REINFORCED EPOXY RESIN COMPOSITES  MULTIDISCIPLINARY SCIENCE JOURNAL  ADIYANTO, O., MOHAMAD, E., JAAFAR, R. AND FAISHAL, M.,
2023  OPTIMIZATION OF PET PARTICLE-REINFORCED EPOXY RESIN COMPOSITE FOR ECO-BRICK APPLICATION USING THE RESPONSE SURFACE METHODOLOGY  SUSTAINABILITY  ADIYANTO, O., MOHAMAD, E., IRIANTO, JAAFAR, R., FAISHAL, M. AND RASYID, M.I.,
2023  THE WATER TAP DESIGN FOR ABLUTION ACTIVITIES CONSIDERING CULTURAL INFLUENCES: A DESIGN FOR SUSTAINABILITY  FRONTIERS IN ENVIRONMENTAL SCIENCE  IHWAN GHAZALI*, NUR WARDAH SUFINA PADZIL, EFFENDI BIN MOHAMAD, LAYLA AHMED AL-MASHJARI, IRIANTO IRIANTO AND SAFARUDIN GAZALI HERAWAN
2022  APPLICATION OF NORDIC BODY MAP AND RAPID UPPER LIMB ASSESSMENT FOR ASSESSING WORK-RELATED MUSCULOSKELETAL DISORDERS: A CASE STUDY IN SMALL AND MEDIUM ENTERPRISES  INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING  OKKA ADIYANTO, EFFENDI MOHAMAD, ROSIDAH JAAFAR, FARID MA’RUF, MUHAMMAD FAISHAL, AND ANGGI ANGGRAENI
2022  INTEGRATED SELF-REPORT AND OBSERVATIONAL RISK ASSESSMENT FOR WORK-RELATED MUSCULOSKELETAL DISORDER IN SMALL AND MEDIUM ENTERPRISES  ENGINEERING AND APPLIED SCIENCE RESEARCH  OKKA ADIYANTO, MOHAMAD EFFENDI, ROSIDAH JAAFAR, JEEFFERIE ABD RAZAK, MUHAMMAD FAISHAL, MUTIA MULAICIN, NOR AKRAMIN MOHAMAD
2022  PROPOSING MULTI-ITEM REPLENISHMENT MODEL FOR AN INVENTORY MANAGEMENT SYSTEM OF MALAYSIA’S SMES  JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING  IRFAN UR RAHMAN, MOHD RIZAL SALLEH, EFFENDI MOHAMAD, RASHID NAWAZ AND UHAMAD ARFAUZA RAHMAN
2022  SYSTEMATIC REVIEW OF PLASTIC WASTE AS ECO-FRIENDLY AGGREGATE FOR SUSTAINABLE CONSTRUCTION  INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY  OKKA ADIYANTO; EFFENDI MOHAMAD; JEEFFERIE ABD RAZAK
2022  THE APPLICATION OF SIX SIGMA FOR PROCESS CONTROL ANALYSIS IN THE MALAYSIAN POULTRY WASTEWATER TREATMENT  JOURNAL OF ECOLOGICAL ENGINEERING  ANUAR ISHAK; EFFENDI MOHAMAD; HAMBALI AREP
2022  THE PATTERN OF LAND USE INTEGRATION IN HISTORIC AREAS IN THE CBD ZONE: COMPARATIVE STUDY OF SPACE SYNTAX ATTRIBUTES OF MALANG, MELAKA, AND KANAZAWA  INTERNATIONAL REVIEW FOR SPATIAL PLANNING AND SUSTAINABLE DEVELOPMENT  PINDO TUTUKO, NURHAMDOKO BONIFACIUS, DANI YUNIAWAN,NURUL AINI,ZHENJIANG SHEN, EFFENDI BIN MOHAMAD,YUYA YAMATO AND ADITYA GALIH SULAKSONO
2022  TRIBOLOGICAL CHARACTERISTICS OF PISTON RING AND CYLINDER LINEAR APPLICATION OF LOW FRICTION TIN NANOCOMPOSITE COATINGS  JURNAL TRIBOLOGI  OKKA ADIYANTO , EFFENDI MOHAMAD , WONSIK CHOI
2021  DEVELOPMENT OF IOT - ENABLED DATA ANALYTICS ENHANCE DECISION SUPPORT SYSTEM FOR LEAN MANUFACTURING PROCESS IMPROVEMENT  CONCURRENT ENGINEERING RESEARCH AND APPLICATIONS  MOHD SOUFHWEE BIN ABD ABD RAHMAN, EFFENDI MOHAMAD, AZRUL AZWAN ABDUL RAHMAN
2021  INTEGRATED APPROACH TO CUSTOMER REQUIREMENT USING QUALITY FUNCTION DEPLOYMENT AND KANSEI ENGINEERING TO IMPROVE PACKAGING DESIGN  ASIA-PACIFIC JOURNAL OF SCIENCE AND TECHNOLOGY  MUHAMMAD FAISHAL, EFFENDI MOHAMAD, ROSIDAH JAAFAR, AZRUL ABDUL RAHMAN, OKKA ADIYANTO, HAPSORO A. JATMIKO AND IJMAL NOVERA
2021  SAFETY AND QUALITY IMPROVEMENT OF STREET FOOD PACKAGING DESIGN USING QUALITY FUNCTION DEPLOYMENT  INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING  MUHAMMAD FAISHAL, EFFENDI MOHAMAD, AZRUL AZWAN ABDUL RAHMAN, SHABILLA DESVIANE, ALFIAN RAMAWAN, MOHAMAD RIDZUAN JAMLI, OKKA ADIYANTO
2021  THE EFFECT OF GEOMETRIC ROAD CONDITIONS ON SAFETY PERFORMANCE OF ABU DHABI ROAD INTERSECTIONS  SAFETY  ABDULLA ALGHAFLI, EFFENDI MOHAMAD, AL ZAIDY AHMED
2021  THE RELATIONSHIP BETWEEN THE ELAPSED TIME FROM THE ONSET OF RED SIGNAL UNTIL ITS VIOLATION AND TRAFFIC ACCIDENT OCCURRENCE IN ABU DHABI, UAE  SAFETY  ALGHAFLI A., MOHAMAD E., ZAIDY A.A.
2020  DEVELOPMENT OF HYGIENIC URINAL DEVICE USING INTEGRATED APPROACH  INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING RESEARCH  HAMBALI A., FIRDAUS A.H., JAAFAR R., HAMBALI R., EFFENDI M.
2019  CLEANER PRODUCTION VALUE STREAM MAPPING AT A CHROMIUM PLATING PLANT: A CASE STUDY  INTERNATIONAL JOURNAL OF AGILE SYSTEMS AND MANAGEMENT  MOHAMAD, E., ISHAK, A., SALLEH, M.R.B., RAHMAN, M.A.A., ITO, T. AND SULAIMAN, M.A.,
2019  GENERATION OF A DECISION SUPPORT SYSTEM TO ENHANCE THE EFFICIENCY OF LEAN MANUFACTURING  INDUSTRIAL ENGINEERING & MANAGEMENT SYSTEMS  EFFENDI MOHAMAD*, MOHD AMRAN IBRAHIM, MUHAMAD ARFAUZ A. RAHMAN, MOHD RIZAL SALLEH, MOHD AMRI SULAIMAN
2019  HELICAL MICRO-HOLE DRILLING OF CHEMICALLY STRENGTHENED GLASS USING CAPSULE-SHAPED ELECTROPLATED DIAMOND TOOL  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  AZIZ M.S.A., MIZOBUCHI A., IZAMSHAH R., KASIM M.S., MOHAMAD E., SALLEH M.R., ISHIDA T.
2019  IMPROVING ELECTRONIC DOCUMENT CONTROL APPROVAL PROCESS THROUGH E-CERTIFICATION  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  RAHMAT, R., MOHAMAD, E., JAAFAR, R., SAPTARI, A., MOHAMAD, N.A., YUNIAWAN, D. AND ITO, T.
2019  ONLINE BOOKING SYSTEMS FOR MANAGING QUEUES AT THE ROAD TRANSPORT DEPARTMENT  JOURNAL OF INDUSTRIAL ENGINEERING, SCIENTIFIC JOURNAL ON RESEARCH AND APPLICATION OF INDUSTRIAL SYSTEM  E MOHAMAD, I ANAK JIGA, R RAHMAT, A AZLAN, M.S ABD RAHMAN, A SAPTARI
2018  DESIGN OF COMPACT PRE-PREGGER MACHINE FOR IN HOUSE PRODUCTION OF PRE-PREG MATERIAL  JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  RAHMAN A.A., MOHAMAD N.R., MUSTAFA Z., ISMAIL S., ABDUL RAHMAN A.A., ABDULLAH S., MOHAMAD E., NORDIN., SALLEH M.R.
 
CONFERENCE
YEAR TITLE NAME OF CONFERENCE AUTHORS
2022 IMPLEMENTATION OF OVERALL EQUIPMENT EFFECTIVENESS (OEE) IN TEXTILE MANUFACTURING COMPANY PROCEEDINGS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS, NO.22-6 PRODUCTION SYSTEM DIVISION RESEARCH PRESENTATION LECTURE 2022  EFFENDI MOHAMAD, ROSNAWATI ABDUL THALEB, PRAKASH SELVARAJ, JOEL CHAVEZ MARTINEZ, WELMER CRUZ DELA CRUZ, AND TERUAKI ITO
2022 CHANGE MANAGEMENT APPROACHES FOR SUCCESSFUL LEAN ADOPTION 32ND DESIGN ENGINEERING AND SYSTEMS DIVISION CONFERENCE OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS  EFFENDI MOHAMAD , QISTINA SHAFEE , MOHD RIZAL SALLEH , MOHD SOUFHWEE ABD RAHMAN , TERUAKI ITO AND DANI YUNIAWAN
2021 KANSEI EVALUATION ON SHAPE DESIGN OF PET BOTTLE 31ST DESIGN ENGINEERING/SYSTEM DIVISION LECTURE 2021  SAE HANADA ; TAKASHI OOYAMA ; EFFENDI MOHAMAD AND TERUAKI ITO
2021 IMPRESSION EVALUATION ON BEHAVIOR OF AVATAR FOR AI SPEAKER SYSTEM 31ST DESIGN ENGINEERING/SYSTEM DIVISION LECTURE 2021  KENGO SADAKANE ; TAKASHI OOYAMA ; EFFENDI MOHAMAD AND TERUAKI ITO
2021 SIMULATION MODEL FOR KANSEI EVALUATION ON INTERACTIVE ROBOT BEHAVIOR 31ST DESIGN ENGINEERING/SYSTEM DIVISION LECTURE 2021  SHUTO MISAWA, TAKASHI OOYAMA, EFFENDI MOHAMAD AND TERUAKI ITO
2021 IMPLEMENTATION OF FIRST IN FIRST OUT SYSTEM IN SUB -ASSEMBLY COMPONENTS IN CASTING INDUSTRY 31ST DESIGN ENGINEERING/SYSTEM DIVISION LECTURE 2021  EFFENDI MOHAMAD , SOUFHWEE RAHMAN, LIM YEE SHING, TERUAKI ITO, DANI YUNIAWAN AND AISYAH LARASATI
2021 MANUAL ASYMMETRY OF THE RELATIONSHIP BETWEEN VELOCITY AND ACCURACY ON RECIPROCAL HAND MOVEMENTS UNDER THE VISCOUS FORCE FIELDS 31ST DESIGN ENGINEERING/SYSTEM DIVISION LECTURE 2021  TAKASHI OYAMA ; EFFENDI MOHAMAD AND TERUAKI ITO
2019 REGENERATING ENERGY THROUGH THE RAINWATER DOWN PIPING SYSTEM INTERNATIONAL CONFERENCE ON DESIGN AND CONCURRENT ENGINEERING 2019 & MANUFACTURING SYSTEMS CONFERENCE 2019  MUHAMAD ARFAUZ A RAHMAN, NUR AMIRAH ZAINUL ABIDIN, EFFENDI MOHAMAD, AZRUL AZWAN ABDUL RAHMAN, MOHD RIZAL SALLEH, MOHAMAD RIDZUAN JAMLI, ROSIDAH JAAFAR, AND HASMUDIN MD ZIN
2018 DEVELOPMENT OF A SIMULATION BASED KANBAN SYSTEM FOR LEAN PRACTITIONERS DESIGN & SYSTEMS CONFERENCE'18, YOMITAN VILLAGE, OKINAWA PREFECTURE, 4-6 NOVEMBER 2018.  EFFENDI MOHAMAD, SHARIFUL REDZUAN NAQUIDDIN, NOR AKRAMIN MOHAMAD, MUHAMAD ARFAUZ A RAHMAN, MOHD AMRI SULAIMAN, MOHD RIZAL SALLEH, DANI YUNIAWAN AND TERUAKI ITO *1 FAKULTI KEJURUTERAAN PEMBUATAN, UNIVERSITI TEKNIKAL MALAYSIA MELAKA, MALAYSIA. 2DEPARTMENT OF INDUSTRIAL ENGINEERING UNIVERSITY OF MERDEKA MALANG, INDONESIA 3INSTITUTE OF TECHNOLOGY AND SCIENCE, UNIVERSITY OF TOKUSHIMA, TOKUSHIMA, JAPAN
2018 REVIEW ON IMPLEMENTATION OF INDUSTRY 4.0 GLOBALLY AND PREPARING MALAYSIA FOR FOURTH INDUSTRIAL REVOLUTION DESIGN & SYSTEMS CONFERENCE'18, YOMITAN VILLAGE, OKINAWA PREFECTURE, 4-6 NOVEMBER 2018.  EFFENDI MOHAMAD, LUKMAN SUKARMA, NOR AKRAMIN MOHAMAD, MOHD RIZAL SALLEH, MUHAMAD ARFAUZ A RAHMAN, AZRUL AZWAN ABDUL RAHMAN AND MOHD AMRI SULAIMAN
2018 WASTE REDUCTION IN HEALTHCARE SERVICE BY VALUE STREAM MAPPING IMPLEMENTATION DESIGN & SYSTEMS CONFERENCE'18, YOMITAN VILLAGE, OKINAWA PREFECTURE, 4-6 NOVEMBER 2018.  EFFENDI MOHAMAD , NOR WAHIDA HASBULLAH, LUBNAH HUSSEIN, NOR AKRAMIN MOHAMAD, MUHAMAD ARFAUZ A RAHMAN, MOHD AMRI SULAIMAN SUHAIMI MOHD ISA AND RUSDI ABDUL RAHMAN
2017 ERGONOMIC DESIGN CHAIR FOR POSTPARTUM MOTHERS INTERNATIONAL CONFERENCE ON DESIGN AND CONCURRENT ENGINEERING 2017 & MANUFACTURING SYSTEMS CONFERENCE 2017  EFFENDI MOHAMAD, ELIYANA SUMAIDY, MUHAMAD ARFAUZ A RAHMAN, MOHD SHUKOR SALLEH, MOHD AMRI SULAIMAN, MOHD RIZAL SALLEH, SAIFUDIN HAFIZ YAHAYA, TERUAKI ITO AND LUBNAH HUSSEIN
2014 ANALYSIS OF TOOL PERFORMANCE DURING BALL-END MILLING OF ALUMINIUM ALLOY 6061-T6 IDECON 2014“ INTERNATIONAL CONFERENCE ON DESIGN AND CONCURRENT ENGINEERING  KASIM, M.S., ATAN, M.H., CHE HARON, C.H., GHANI, J.A., SULAIMAN, M.A., MOHAMAD, E., MINHAT, M., HADZLEY, M. AND SAEDON, J.B.,
2013 A PROPOSAL OF TOTAL PRODUCTIVE MAINTENANCE TRAINING SYSTEM JSME NO.13-205 THE 13TH DESIGN ENGINEERING WORKSHOP 2013  DANI YUNIAWAN, TERUAKI ITO, EFFENDI MOHAMAD
2013 A STUDENT MOBILITY PROGRAM THROUGH CROSS CULTURAL AND TECHNICAL EXPOSURE JSME NO.13-205 THE 13TH DESIGN ENGINEERING WORKSHOP 2013  
2013 LEAN MANUFACTURING TOOLS TRAINING SYSTEM JSME NO.13-205 THE 13TH DESIGN ENGINEERING WORKSHOP 2013  
2013 A SIMULATION-BASED APPROACH TO DECISION SUPPORT FOR LEAN PRACTITIONERS 20TH ISPE INTERNATIONAL CONFERENCE ON CONCURRENT ENGINEERING  
2009 PRODUCTIVITY ANALYSIS TOWARDS LEAN MANUFACTURING AT A TEXTILE MANUFACTURING COMPANY MALAYSIAN TECHNICAL UNIVERSITIES CONFERENCE ON ENGINEERING AND TECHNOLOGY 2009  
2008 LEAN MANUFACTURING IMPLEMENTATION: A STUDY ON THE DEVELOPMENT OF KEY PERFORMANCE INDICATORS (KPIS) AT AN AEROSPACE MANUFACTURING COMPANY INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2008  
2008 MANAGING KEY PERFORMANCE INDICATORS (KPIS): A CASE STUDY AT AN AEROSPACE MANUFACTURING FACILITY KNOWLEDGE MANAGEMENT INTERNATIONAL CONFERENCE 2008  
2008 SIMULATION MODELING FOR BALANCING AND OPTIMIZING A DIGITAL MEASURING DEVICE (DMD) PRODUCTION LINE MALAYSIAN TECHNICAL UNIVERSITIES CONFERENCE 2008  
2008 ENHANCEMENT OF AN EFFECTIVE TRAINING IN MANUFACTURING COMPANY KNOWLEDGE MANAGEMENT INTERNATIONAL CONFERENCE 2008  
2008 DEVELOPMENT OF AN OFFICE TPM FOR LECTURER€™S ROOM NATIONAL MANAGEMENT CONFERENCE 2008 (NAMAC 08)  
IMPROVING DIE EXCHANGE PROCESS IN TEXTILE MANUFACTURING COMPANY WITH SMED 24TH DESIGN ENGINEERING SYSTEMS DIVISION JSME CONFERENCE JAPAN SOCIETY OF MECHANICAL ENGINEERS,[NO.14-27], 17-19TH SEPTEMBER 2014 TOKUSHIMA JAPAN  
AN INITIATIVE TO IMPLEMENT LEAN MANUFACTURING USING VALUE STREAM MAPPING IN TEXTILE MANUFACTURING COMPANY CONFERENCE: 24TH DESIGN ENGINEERING SYSTEMS DIVISION JSME CONFERENCE [NO.14-27] JAPAN SOCIETY OF MECHANICAL ENGINEERS, 17-19TH SEPTEMBER , TOKUSHIMA , JAPAN., AT TOKUSHIMA , JAPAN., VOLUME: [NO.14-27]  
 
POSTGRADUATE SUPERVISION
NO NAME LEVEL OF STUDY ROLE STATUS
1  ABDULLA HAMAD OBAID BALABD ALGHFELI DOCTORATE MAIN SUPERVISOR GRADUATED   (2023)
2  MOHD SOUFHWEE BIN ABD RAHMAN DOCTORATE MAIN SUPERVISOR GRADUATED   (2022)
3  NOR ASMAA ALYAA BINTI NOR AZLAN DOCTORATE MAIN SUPERVISOR GRADUATED   (2021)
4  OESMAN RALIBY DOCTORATE MAIN SUPERVISOR ACTIVE  
5  MUHAMMAD FAISHAL DOCTORATE MAIN SUPERVISOR ACTIVE  
6  OKKA ADIYANTO DOCTORATE MAIN SUPERVISOR ACTIVE  
7  ANUAR BIN ISHAK DOCTORATE MAIN SUPERVISOR ACTIVE  
8  NUR AIN QISTINA BINTI MUHAMMAD SHAFEE DOCTORATE MAIN SUPERVISOR ACTIVE  
9  TAREQ HUMAID MOHAMMED ALMASKARI DOCTORATE MAIN SUPERVISOR ACTIVE  
10  SHAMSA RASHID SAEED ALI ALHEFAITI DOCTORATE MAIN SUPERVISOR ACTIVE  
11  HAMAD ABDULLA MOHAMED IBRAHIM ALDHAHERI DOCTORATE MAIN SUPERVISOR ACTIVE  
12  MOHD KHIDIR BIN OSMAN DOCTORATE MAIN SUPERVISOR ACTIVE  
13  ARUMUGAM MANIKAM DOCTORATE CO-SUPERVISOR GRADUATED   (2022)
14  TAHER KHALAF BARAKAT AYOUB DOCTORATE CO-SUPERVISOR ACTIVE  
15  KHAIRUL AZRI BIN AZLAN DOCTORATE CO-SUPERVISOR ACTIVE  
16  FEBRIAN BIN IDRAL DOCTORATE CO-SUPERVISOR ACTIVE  
17  RASHITAH BINTI RAHMAT MASTERS MAIN SUPERVISOR GRADUATED   (2020)
18  ANUAR BIN ISHAK MASTERS MAIN SUPERVISOR GRADUATED   (2018)
19  MOHAMAD AMRAN BIN IBRAHIM MASTERS MAIN SUPERVISOR GRADUATED   (2017)
20  MUHAMMAD KHAIRUL HAMIZAN BIN MOHAMAD ZAIDI MASTERS MAIN SUPERVISOR ACTIVE  
21  MANAR K.AALKAHLOUT MASTERS MAIN SUPERVISOR ACTIVE  
22  ROBERT NG HOCK LEONG MASTERS CO-SUPERVISOR GRADUATED   (2023)
23  MUHAMMAD SHAHMI BIN RAZAK MASTERS CO-SUPERVISOR GRADUATED   (2021)
24  NUR WARDAH SUFINA BINTI PADZIL MASTERS CO-SUPERVISOR ACTIVE  
25  NASRI BIN SEMIUN MASTERS CO-SUPERVISOR ACTIVE  
PROFESSIONAL MEMBERSHIPS / LEARNED SOCIETY
YEAR ROLE INSTITUTION LEVEL
 2018   PROFESSIONAL QUALIFICATION   LEMBAGA TEKNOLOGIS MALAYSIA (MBOT)   KEBANGSAAN 

CONSULTANCY
YEAR TITLE OF PROJECT AGENCY ROLES LEVEL
2021   SPRING ENGLISH CAMP 2021   TOKUSHIMA UNIVERSITY  LEADER  INTERNATIONAL 
2021   KURSUS PENDAWAIAN ELEKTRIK   JABATAN KEBAJIKAN MASYARAKAT NEGERI MELAKA  LEADER  NATIONAL 
2021   PROGRAM BENGKEL MENINGKATKAN KEMAHIRAN DAN INOVASI MELESTARI KESEJAHTERAAN SUNGAI   JABATAN PENGAIRAN DAN SALIRAN NEGERI JOHOR  LEADER  NATIONAL 
 
LIST OF RESEARCH AWARDS
YEAR TITLE EXHIBITION LEVEL AWARD
2023   RAPID ADVANCE FUTURE (RAF) LIGHT WEIGHT PROSTHETICS LEG   ITEX , 34TH INTERNATIONAL INVENTION, INNOVATION & TECHNOLOGY EXHIBITION, MALAYSIA (ITEX  INTERNATIONAL  GOLD 
INTELLECTUAL PROPERTIES
YEAR INVENTION NAME
TYPE
 ROLE
2021  HYGIENIC PORTABLE FEMALE URINAL DEVICE (HPFUD)  COPYRIGHT CO-INVENTOR
2020  UTEMSHIELD  TRADE MARKS CO-INVENTOR
2020  FACE SHIELD'S FRAME DESIGN  INDUSTRIAL DESIGN CO-INVENTOR
2020  CYBER PHYSICAL SYSTEM ARCHITECTURE FOR AUTOMATED MATERIAL HANDLING (CPS-AMH)  COPYRIGHT CO-INVENTOR
2017  A MALE URINAL SYSTEM  PATENT CO-INVENTOR
2016  ILEAN2U  COPYRIGHT MAIN INVENTOR
2014  A PLASTIC WALL TILE AND METHOD OF MANUFACTURING THEREOF   PATENT CO-INVENTOR
     
 
KATEGORI MAKLUMAT
 PEJABAT DIRUJUK
PERSONAL INFORMATION BAHAGIAN SUMBER MANUSIA, PEJABAT PENDAFTAR
ACADEMIC QUALIFICATON
PROFESSIONAL MEMBERSHIP / LEARNED SOCIETY BAHAGIAN PEMBANGUNAN BAKAT, PEJABAT PENDAFTAR
TEACHING EXPERIENCE

 

PENTADBIR AKADEMIK FAKULTI
  • UNDERGRADUATES
  • POSTGRADUATES

SEKOLAH PENGAJIAN SISWAZAH

(SPS)
POSTGRADUATE SUPERVISION

SEKOLAH PENGAJIAN SISWAZAH

(SPS)
FIELD OF INTEREST

PUSAT PENGURUSAN PENYELIDIKAN DAN INOVASI

(CRIM)
LIST OF GRANTS
LIST OF RESEARCH AWARDS

PUSAT PENGURUSAN KOLABORASI UTeM

(RICE)
INTELLECTUAL PROPERTIES
COMMERCIALIZATION
PUBLICATIONS PERPUSTAKAAN LAMAN HIKMAH
CONSULTANCY

UTeM HOLDING SDN.BHD
 
>>>>>>